This post may contain affiliate links.
Working in an office can require optimal privacy and covering the window on your door can help. The good news is that you have different options for this goal. We looked into the best ways to cover an office door window to optimize privacy and security while you work.
Remember to cover the entire glass pane to take advantage of optimal privacy from your office door window. The different window treatments that you can look into using for the window on your office’s door are:
- One-way privacy film
- Frosted window film
- Glass paint
The process of installing these options might seem relatively straightforward. However, one misstep could lead to you spending more time and effort than intended. Not to worry as we’ll guide you through the different installation processes to cover your office door window.
How Do You Cover a See-Through Office Door Window?
In this section, let’s look into the different types of window furnishings to help optimize the privacy and security of your office.
One-Way Privacy Film
One-way privacy films work by reflecting light on one side. For instance, the film will act as a mirror if a person looks into your office through the glass on the door. However, you can see the individual peering into your office from the inside unhindered.
Here’s how to install a one-way privacy film on your office door window:
- Clean the glass. Remove grease marks, fingerprints, or dust particles as these elements can ruin the installation. Also, remove window accessories, such as wreaths, before you start cleaning the pane.
- Once cleaned, dampen the window with a liquid detergent and warm water mixture using a spray bottle.
- Peel the back off of the one-way film. Set the film on a table or flat surface and apply masking tape on one side. That way, the film doesn’t move around while you’re peeling the adhesive backing.
- Position the film on the window. Take as much time as needed as removing the film from the pane can ruin the job.
- Once in the preferred position, spray the film with the soapy water solution. Then, use a squeegee to remove the excess moisture.
Frosted Window Film
Frosted window films work similarly to their one-way counterparts. However, instead of acting like a mirror, the frosted film reduces the vision significantly of relatively any individual looking through the office door window, which also includes you. Although you won’t be able to view the outside of your office clearly, you’ll get optimal privacy in return.
Installing a frosted window film has relatively the same process as setting up a one-way film. The steps are as follows:
- Clean the window and make sure it doesn’t have dirt and debris.
- Use a liquid detergent and warm water mixture to spray the glass pane slightly.
- Peel the adhesive backing on the film and position the cut piece on the office door window.
- Spray the film on the glass panel and use a squeegee to remove the excess moisture.
If you’re looking for an opaque finish that doesn’t allow any people to look in or out of your office, painting the glass door window can be your best option. Additionally, you can release your creative side for this project. Therefore, you won’t only gain privacy and security but also a beautiful-looking glass panel on your office’s door.
Take note that you should only use permanent, solvent-based paint on the glass window. Water-based paint can run on a smooth surface, ruining the paint job. You also have the option to paint your door during this task to help save time and resources.
Here are the steps to paint your office door window:
- Wash the glass window with a liquid detergent and warm water solution to remove dirt and debris. Let the pane dry completely before applying paint.
- Use a flat brush to apply the paint of your choice on the glass panel. You can apply multiple coats if desired. However, make sure that the previous coat dries completely before applying the next paint layer.
Curtains are non-destructive options to enhance the privacy and security of your office. You also have a broad range of designs and styles to choose from that fit your office’s theme. Take note that you can purchase appropriately-sized window curtains for the glass panel on your office door. That way, you won’t have to go through the extra effort of cutting long pieces of fabric.
Once you have your door window curtains, here are the steps to install them:
- Use a sash rod kit (that should include a mounting bracket, screws, and a curtain rod) and install it at the top of your window from inside the office.
- Once the rod is in place, use a small level to ensure the curtain will be parallel to the floor.
- Slide the curtain into the rod and let the fabric hang freely.
Like curtains, blinds are excellent window treatments that don’t require you to work on the glass but on its surroundings. Additionally, while curtains open and close horizontally, blinds work vertically. You pull a cord system that opens and closes the blinds to suit your preferred level of privacy. Plus, you can adjust the blockage by twisting the rod that hangs at the side.
Blind installation on an office door window is relatively straightforward, and here are the steps to do it:
- Use a pencil to mark the location of the blinds’ brackets on your office’s door. Next, use a level to ensure that the brackets will be parallel to the floor.
- Use a drill to create holes for the screws on your door.
- Install the brackets on the drawn markings.
- Once the brackets are in place, take the blinds’ headrail. Make sure this part is facing you or the inside of your office. Slide the headrail into the brackets after figuring out the correct orientation. You should hear a click if the headrail is in the right place.
- Mount the blinds and test them out by raising and lowering them.
What is the Best Privacy Film for Office Door Windows?
According to the definition of the word, “best” means to be the most advantageous or desirable. Therefore, the best privacy film for a particular individual might not offer the most benefits to another person.
Understanding which of the many privacy films on the market is best for your specific requirements requires you to look into certain factors. Some of the things you need to take note of includes glare prevention, insulation, price, and privacy level offered.
How Do You Cover a Glass Front Door for Privacy?
You have different options to cover a glass front door to enhance privacy. However, the glass treatments are going to be larger than covering a reasonably small office door window. For example, you may need to use window curtains that are two to three times larger than what you’d generally use to cover a small glass pane.
Does Window Film Provide Privacy at Night?
Yes, but it depends on the type of window film you install. If you want optimal privacy at night, a film with stained glass can be a good option. The different colors won’t let a significant amount of light pass through the glass panel, enhancing privacy and security for interiors.
Is It Better To Have Blinds or Curtains?
Blinds and curtains have their unique pros and cons. Understanding these benefits and shortcomings will help you arrive at an informed decision when the time to shop arrives.
For instance, you can choose from a broad range of colors, designs, textures, and thickness options when choosing curtains. But curtains aren’t as sturdy as blinds. On the other hand, many blinds are reasonably sturdy and are quite easy to clean. However, texture options aren’t more extensive for blinds than curtains.
Choose among different options to cover your office door window. Your selections include one-way window films, frosted window films, blinds, and curtains. Furthermore, you may also choose to paint the glass panel on your office door.